with pictures in german as pdf

1. Assembly of the basket

• Interconnect the base panels with the side panels using the insertable rods, including the base panels of adjacent baskets.
• Interconnect the partition panels provided to the base panels by using insertable rods too.
• Fold up the side panels and connect them also by means of insertable rods, including the side panels of the adjacent baskets.

2. Filling the baskets and mounting of the interior tiebraces

• Fill up the units tightly with frost resistant and pressure resistant rock only up to about a third of the height of the basket, then insert the interior tiebraces.
• Then after filling another third of the height insert the next tiebraces.
• The tiebraces give the basket the required stability and prevent the basket panels from deforming.

3. Closing the top panel

• After completion of the filling process connect the top panel with further insertable rods and include the top panels of the adjacent baskets.

4. Supports during filling

• In order to prevent the front panel from bulging, reinforcing bars or ladders can be fastened with steel wire-binders to the front panels.

Insert spiral rod
If required close spiral rod with pliers
Only one single type of spiral rod is required to connect the panels of each possible combination
Possible bonding effect

Stone baskets
Component parts available for varying basket sizes

Basket partition sizes of wire mesh mats, no. of insertable, no. of sizes panels, quantity of wire mesh mats rods tiebraces

Position of the tiebraces in plan view for a single basket size of 200 x 100 x 100 cm
length x width x height,
without partition panel
with partition panel